Call Us Toll-Free: 1 (888) 361-8511

Powered by Live-Tech

RSS Feed
Knowledgebase : TalkSwitch PBX Phone Systems
     

Direct Line Access - auto configure the extension to a specific Hunt GroupTalkSwitch has Advanced Extension settings that allow you to auto configure the extension to a specific Hunt Group. Please see below how to complete this. Direct line access The Di...
Choppy Voice or Call using IP PhoneIf the problem is isolated or NOT here are a few direct suggestions to complete. Check for the latest Firmware Version and confirm that phone is fully Updated. Locate the LAN IP address of the phone that is having issues...
How to Factory Reset TalkSwitch 24CAPlease follow the instructions below to set the 24CA back to factory reset: Please ensure that the TalkSwitch software is closed and that the unit is connected to the PC with a USB cable. Open USB Terminal application i...
TalkSwitch FeaturesTalkSwitch telephone systems are loaded with features that small businesses need and big businesses take for granted, including features that cost extra on other systems. And unlike phone company services such as voicemail or call forwa...
TalkSwitch Software & Firmware UpdatesDownload the latest configuration software for TalkSwitch telephone systems. http://talkswitch.com/us/en/support/downloads/ Recommended PC System Specifications Ensure that this software is installed on a PC meeti...
Setting a Hunt Group as an Access Code Prefix If you need to dial 9 or 81-88 to access an outside line, then you will want to program your phone to automatically insert a hunt group number before all calls placed from the Missed and Received call logs as ...
How to Reset your TalkSwitch PasswordHaving TalkSwitch problems? We strongly recommend contacting Live-Tech via Chat or by Phone 1-888-361-8511. Live-Tech has over 10 Years of TalkSwitch Support & Sales Experience.
How To Pick Up A Call From Any Ringing Local Extension In the event you are away from your desk phone and would like to take a ringing call at another desk phone that is not ringing please follow this step. How To Pick up
How to change TalkSwitch Schedule Modes & Automatic Scheduling Open TS Management Software Go to the Scheduling Option Note what Mode the System is working under: (Current Mode:) Under day of the week you can pick and choose what time to RUN each task...
How to Change TalkSwitch Modes Remotely Task Change TalkSwitch system Operating Mode Remotely from MODE 1 (OPEN) to MODE 2 (CLOSED) or Holiday Mode 3 How to Change TalkSwitch Modes Remotely You will need to call in to your TS unit and gain access using co...
How to Enable or Disable Do Not Disturb Mode while out of the Office (Remote) Applies toTalkSwitch 24-CA, 240VS, 244VS, 248VS, 480VS, 484VS, 488VS, 840VS, 844VS, 848VS. Call the Main Phone Number connected to the TalkSwitch Wait for Auto Attendant to Answ...
How To Transfer Caller Directly To VoicemailArticle Applies to PBX HardwareTalkSwitch Phone System 240vs, 244vs, 248vs, 480vs, 484vs, 488vs, 840vs, 844vs, 848vs How to transfer caller directly to an extensions voicemail from another TalkSwitch extension T...
How To Create/Change Auto Attendant Message/Greeting Synopsis Working with auto attendant messages You can record a new message, load a professionally recorded message, or erase a message from the TalkSwitch system. Applicable ToTalkSwitch Phone SystemRec...
Troubleshoot: TalkSwitch Phones Will Not Acquire An IP (DHCP Failed, No Service, Page Load Error) To resolve please attempt the following: Close out from network related programs. Locate your Physical Network Router. (Linksys, Netgear, Motorola, RCA, etc)...
How To Enable CDR Data Collecting On Your TalkSwitch UnitPlease follow the steps belowOpen your TS Software & connect to your System. Once in the software please go to Tools Choose option Call Logging Output (CDR) A new window opens up - Choose the Dr...
Firmware Update Using the Internet (Recommended)Step 1Make sure that no calls are in progress on handsets connected to the base station you wish to update. If your system uses repeaters to extend the range of your handsets, turn the repeaters off until th...
3-Party Conference With TS-450i / FortiVoice 450iThe phone supports conferencing with two other parties. There are 2 methods for setting up a conference. Method 1: Setting up a conference callPlace the first call.Press the Right navigation button to scrol...
How To Register FortiVoice IP Phones to TalkSwitch Phone SystemsNow that TalkSwitch is FortiVoice, a lot of people worldwide still own and use the original TalkSwitch CVA, VS or VSx models. If you purchased new FortiVoice FON-350i, FON-450i or FON-550i
Powered By Live-Tech